The Makita DTW285 18V LXT Impact Wrench has an LED Job light with pre-glow and after-glow functions
The Makita DTW285 is an updated version of the DTW281 Cordless Impact Wrench. It has a new mode called Reverse Rotation Auto-Stop Mode which stops rotation after loosening a bolt. Also equipped with 3 Stage power selection for optimum rpm and fastening torque. XPT technology that protects against dust, moisture and vastly lengthens tool life. The LED Job light has pre-glow and after-glow functions. It is suitable for scaffolding applications. This DTW285RTJ model comes with 2 x 5.0Ah batteries, a DC18RC Charger, MakPac Case and Belt Hook.
Features:
Electric brake
Variable speed control by trigger
Forward/reverse rotation
LED job light will light up the work area in dark conditions
Brushless motor for maintenance-free and more efficient operation
Compact design with an overall length of 147mm
Phosphorescent bumper
Ergonomic soft grip
Equipped with Battery protection circuit: designed to protect the battery from damages due to over-discharge, high temperature or overload current
Battery fuel gauge
Reverse rotation auto-stop mode: This mode works only with pulling the trigger fully in a counter-clockwise rotation. When the bolt/nut gets loosened enough, the tool stops the impact and rotation in 0.2 seconds
Comes With:
2 x 5.0Ah batteries
DC18RC Charger
Belt Hook
MakPac Case
Specification:
Nut Busting Torque: 400 Nm
Driving Shank: 1/2" Square
Blows per Minute (Hi) - ipm: 0 - 3500 ipm
Blows per Minute (Med) - ipm: 0 - 2600 ipm
Blows per Minute (Lo) - ipm: 0 - 1800 ipm
Standard Bolt: M10-M20
High Tensile Bolt: M10-M16
Noise sound pressure: 96 dB(A)
Noise sound power: 107 dB(A)
Noise K factor: 3 dB(A)
No Load Speed (hard/med/soft): 0-2800 / 2100 / 1600 rpm
Max Fastening Torque: 280 Nm
Vibration: Fastening Bolt: 11.5 m/sec_
Vibration K factor: 1.5 m/sec_
Net weight: 1.7 kg