Makita DTW300RTJ 18V LXT Brushless 1/2" Impact Wrench with 2x BL1850B 5.0Ah Batteries, DC18RC Charger, and Makpac Type 2 Carry Case
The Makita DTW300RTJ is a powerful cordless 1/2 inch impact wrench, designed to deliver high performance and efficiency. Powered by a single 18V LXT Li-Ion battery, this tool is ideal for automotive, installation, and fabrication tasks. The DTW300RTJ features an advanced brushless motor that enhances run time and performance, offering up to 330Nm of maximum torque and 580Nm of nut-busting torque.
With precise fastening control, the DTW300RTJ includes a 4-speed power selection switch and three forward and three reverse auto-stop modes. This allows for greater efficiency and control, especially when dealing with different fastening applications. The full-speed mode function accelerates the wrench to maximum speed with reduced trigger pull.
Additionally, the impact wrench is equipped with Makita's Extreme Protection Technology (XPT™), which improves the tool’s durability in harsh conditions by directing water and dust away from critical internal components.
Features:
- Efficient BL™ Brushless Motor: Electronically controlled to optimize battery use, offering up to 50% longer run time per charge
- Electronically-Controlled Motor: Adjusts torque and RPM to meet application demands
- 3 Forward and 3 Reverse Auto-Stop Modes: Enhances efficiency by stopping the tool when the fastener is adequately loosened
- 4-Stage Power Selection: Provides optimum RPM and fastening torque
- Max Torque: 330 Nm
- Nut-Busting Torque: 580 Nm
- XPT Technology: Protects against dust and moisture
- LED Job Light: Includes pre-glow and after-glow functions for better visibility
- Compact and Ergonomic Design: Only 144 mm long for ease of use
- Rubberized Soft Grip: Enhances comfort during use
- Star Protection Computer Controls™: Guards against overloading, over-discharging, and overheating
WHAT'S IN THE BOX
- 1x DTW300 Impact Wrench
- 1x Belt Clip
- 2x BL1850B 5.0Ah Batteries
- 1x DC18RC Charger
- 1x Makpac Type 2 Carry Case with Inlay
Specifications:
Feature | Details |
---|---|
Voltage | 18V LXT |
Driving Shank | 1/2" Square |
Max. Fastening Torque | 330 Nm |
Nut Busting Torque | 580 Nm |
Blows per Minute (Hi) | 0 - 3400 ipm |
Blows per Minute (Med) | 0 - 2600 ipm |
Blows per Minute (Lo) | 0 - 1800 ipm |
Standard Bolt | M10 - M20 |
High Tensile Bolt | M10 - M16 |
No Load Speed (Max) | 0 - 3200 rpm |
No Load Speed (Hard) | 0 - 2600 rpm |
No Load Speed (Med) | 0 - 1800 rpm |
No Load Speed (Soft) | 0 - 1000 rpm |
Net Weight | 1.5 - 1.8 kg |
Noise & Vibration:
Measurement | Details |
---|---|
Noise Sound Pressure | 97 dB(A) |
Noise Sound Power | 108 dB(A) |
Noise K Factor | 3 dB(A) |
Vibration Fastening Bolt | 12.5 m/sec² |
Vibration K Factor | 1.5 m/sec² |